First Steps
Ensure the device is charged
Turn the device on using the power buttonConnectivity
There are two ways to connect your Miura 020 card reader to the Blink app:
via Bluetooth
via Wi-Fi
Connecting your Miura - WiFi
...
Press the green button (✔) to turn on the card reader (or wake it up from standby mode),
open the menu by pressing the yellow 'left-pointing arrow' button
select 'Bluetooth' by pressing the '1' button
select 'Start Pairing' by pressing the '3' button
go to your mobile device Settings -> Bluetooth and turn on the Bluetooth connection,
select the card reader from the list of available Bluetooth devices.
Your card reader will be titled as Bizzon + last three digits of the serial number (e.g. Bizzon 456).A PIN will display on the screen of the mobile device.
Compare it with the passkey displayed on the card reader, it needs to be the same key.Press Enter (✔) on the card reader to confirm that the PIN and the passkey are the same.
Click OK on the mobile device to complete the pairing. Select it to pair.
...
Note: The Bluetooth connectivity range is limited so we highly recommend keeping the card reader as close as possible to its paired device during the course of payment to avoid any errors.
Taking a Payment
Minimum transaction is 50 pence
Click 'start payment' on the Blink App
Enter the amount and unique reference
Click proceed, this will send the information to the connected Miura device
Payments can be taken with contactless or with Chip and Pin
A transaction receipt will be displayed; this can be sent via email
Troubleshooting - First Steps
Hard re-set via putting a pin in the re-set button (on the right hand side) and select option 2
Clear the cache of the Blink App