...
To charge the terminal, plug the charger directly into the top left-hand side of the device, or by plugging the angled charger into the base unit, through the removal of the back panel.
Step 2:
To power up the terminal, press the green [enter] key.
Step 3:
WiFi Set-Up
Press the down key.
Select ‘Control panel, ‘Terminal settings’, ‘Comm means’, and then ‘WiFi’.
Choose ‘Enable’ Power port.
Select ‘Scan networks’ and press the enter key, the terminal will scan for available networks.
Select the desired network.
Enter the WiFi password and press enter.
A confirmation screen will display reading ‘New Profile OK’.
The WiFi symbol at the top will have turned green.
Once connected, your terminal should be ready to take a payment.
...